Displaying Network Channels - Paradyne 9161 User Manual

Displaying Network Channels

9161-A2-GB20-00
Use the Network Channel Display screen to display all of the DS0 assignments
for each DS0 on the network interface. This screen also provides information on
the slot assignment for each NAM or APM type.
Use the following menu sequence to display network channel information.
Main Menu Status
The Network Channel Display screen displays 24 two-field entries in three rows.
Together, each two-field entry defines the assignment for one Network interface
time slot. The top field represents the time slot of the Network Interface. The
bottom field represents the cross connect status of the associated (top field)
network time slot.
The following information is available for viewing.
The Network Time Slot Fields (top) . . .
N01 to N24
The Cross Connect Status Field
(bottom) . . .
Unassgn
S ss P p
DSXyy
DSXyyr
RsvdAPM
DDL
November 1996
Displaying System Information
Cross Connect Status
Indicate . . .
The Network Interface time slot (01 to 24).
Indicates . . .
The time slot is unassigned.
The voice or sync data port ( p ) of slot ( ss )
assigned to the network time slot.
The DSX-1 time slot assigned to the
network time slot ( yy ).
The DSX-1 time slot ( yy ), using Robbed Bit
Signaling ( r ) assigned to the network time
slot.
The time slot is assigned to an APM which
is either:
failed,
removed or not installed, or
has been replaced by an APM type that
is not compatible with the configuration.
The time slot is reserved for a
management path using Direct Data Link
(DDL).
Network Channel Display
4-5