Self-Test Results Messages - Paradyne 9161 User Manual

Self-Test Results Messages

9161-A2-GB20-00
Table 5-4. Health and Status Messages (4 of 4)
Message What It Indicates
Device Fail yyyyyyyy The operating software
detects an internal error.
(yyyyyyyy represents an
eight-digit hexadecimal failure
code for use by service
personnel) This condition
clears after a reset of the unit.
Module MisConfig, The APM is not configured as
Slot xx defined in the NAM's
configuration table.
Module Unsupported, The NAM does not recognize
Slot xx the APM.
1
xx represents physical slots.
All self-test results messages appear in the middle column of the System and
Test Status screen (see Table 5-5).
Table 5-5. Self-Test Results Messages (1 of 2)
Message What It Indicates
CPU Fail The CPU failed internal
testing.
NAM Fail One or more of the NAM's
integrated circuit chips failed
internal device level testing.
November 1996
Maintenance and Troubleshooting
What To Do
Contact your service
representative.
1
Check that an E&M Voice
1
APM, FXS Voice APM, or
Sync Data APM is installed in
Slot xx .
Re-download the NAM
configuration.
What To Do
1. Reset the unit and try
again.
2. Call your service
representative for
assistance.
3. Return the unit to the
factory.
1. Reset the unit and try
again.
2. Call your service
representative for
assistance.
3. Return the unit to the
factory.
5-11