Paradyne 9161 User Manual page 47

Maintenance and Troubleshooting
5-12
Table 5-5. Self-Test Results Messages (2 of 2)
Message What It Indicates
Network T1 Fail The NAM failed to internally
loop data on the network T1
circuit.
DSX-1 T1 Fail The NAM failed to internally
loop data on the DSX-1 circuit.
Memory Fail The unit failed memory
verification.
Failure xxxxxxxx An internal failure occurred.
(xxxxxxxx represents an
eight-digit hexadecimal failure
code for use by service
personnel).
Passed No problems were found
during power-up.
November 1996
What To Do
1. Reset the unit and try
again.
2. Call your service
representative for
assistance.
3. Return the unit to the
factory.
1. Reset the unit and try
again.
2. Call your service
representative for
assistance.
3. Return the unit to the
factory.
1. Reset the unit and try
again.
2. Call your service
representative for
assistance.
3. Return the unit to the
factory.
Record the failure code and
contact your service
representative.
No action needed; no
problems were found during
power-up or reset.
9161-A2-GB20-00