Entering Identity Information - Paradyne 9161 User Manual

Start-Up

Entering Identity Information

3-4
Use the Device Name screen to give a particular name to this system for
identification and to change or display the general system name, system location,
and system contact.
Procedure
To add or change device identity information:
1. From the Main Menu screen, select Control and press Return. The Control
menu appears.
2. Select Device Name and press Return. The Device Name screen appears.
3. Place the cursor in the field ( Tab to the field ) where you want to add or
change information.
NOTE:
To clear existing information, place the cursor in the Clear field ( Tab to
the Clear field ) and press Return.
If the selection is . . .
Device Name
System Name
System Location
System Contact
4. To save changes, select Save and press Return.
When Save is complete, Command Complete appears in the message area
at the bottom of the screen.
November 1996
Enter the . . .
Unique name for device identification of up to
20 characters.
SNMP system name; can be up to 255 characters.
Physical location of this SNMP managed node; can be up
to 255 characters.
Name and how to contact the system person for this
SNMP node; can be up to 255 characters.
9161-A2-GB20-00