Paradyne 9161 User Manual page 38

9161-A2-GB20-00
Table 5-1. ASCII Alarm Messages (2 of 4)
Message
mm/dd/yy hh:mm:ss –
Alarm Cleared for Out of
Frame (OOF) condition at
the Network or DSX-1
Interface.
mm/dd/yy hh:mm:ss –
Continuous Out of Frame
(OOF) condition at
synchronous data port in
slot ss port n .
mm/dd/yy hh:mm:ss –
Alarm Cleared for Out Of
Frame (OOF) condition at
synchronous data port in
slot ss port n .
mm/dd/yy hh:mm:ss –
An Excessive Error Rate
(EER) has been detected at
the Network Interface.
mm/dd/yy hh:mm:ss –
Alarm Cleared for
Excessive Error Rate
(EER) at the Network
Interface.
mm/dd/yy hh:mm:ss –
An Excessive Error Rate
(EER) has been detected at
synchronous data port in
slot ss port n .
mm/dd/yy hh:mm:ss –
Alarm Cleared for
Excessive Error Rate
(EER) at synchronous data
port in slot ss port n .
November 1996
Maintenance and Troubleshooting
What It Indicates What To Do
Alarm condition no No action needed.
longer exists.
A continuous 1. Ensure that EDL
out-of-frame condition
occurred on the
synchronous data port
for the identified slot
and port.
2. There is a
Alarm condition no No action needed.
longer exists.
An Excessive Error Contact network
Rate condition is provider.
detected on the
network interface.
Alarm condition no No action needed.
longer exists.
An excessive error There is a network
rate occurred on the problem with the
synchronous data port fractional portion of
for the identified slot the link carrying this
and port. port's data. Contact
network provider.
Alarm condition no No action needed.
longer exists.
Priority
13
is enabled on the
far-end port.
Refer to the
Technical
Reference for
setting
configuration
options.
network problem
with the
fractional portion
of the link
carrying this
port's data.
Contact network
provider.
12
14
5-3