Switching Between Screen Work Areas - Paradyne 9161 User Manual

Switching Between Screen Work Areas

9161-A2-GB20-00
Use Ctrl-a to switch between the two screen work areas to perform all screen
functions.
Procedure
1. Press Ctrl-a to switch from the screen area to the screen function key area.
2. Select either the function's designated (underlined) character or Tab to the
desired function key.
Example:
Enter e or E to Exit.
3. Press Return. The function is performed.
4. To return to the screen area, press Ctrl-a again.
November 1996
User Interface
2-7