Connecting To A Dte; Connecting To The Network - Paradyne 7520 Technical Manual

Connecting to a DTE

"

Connecting to the Network

"
7520-A2-GN10-10
NOTE:
Communications parameters on the Terminal port are 9.6 kbps, 8 bits per
character, one stop bit, and no parity.
Procedure
1. Insert one end of a 34-pin V.35 cable into the MS34 DTE port
– or –
insert one end of 25-pin EIA-232 cable into the DB25 DTE port.
2. Insert the other end of the cable into the appropriate connector on your DTE.
TERMINAL DTE
POWER
DTE
Procedure
1. Insert the 8-pin connector on the RJ48S network cable into the NETWORK
jack.
2. Insert the other end of the cable into the RJ48S modular jack.
TERMINAL DTE
POWER
December 1998
D
T
E
or
DTE Port
D
T
E
RJ48S
Jack
NETWORK
97-15784
Network
Interface
NETWORK
97-15785
5