Table of Contents
Advertisement
™
Carestation
620/650/650c (A1)
10. Ventilator quick keys
11. Total Flow
12. Split screen
Figure 2-14 • Typical Normal/Full view
Digit fields
Waveform fields
2-16
Displays Mode, associated ventilation parameters, and More Settings. For
example: Mode, TV, RR, I:E, Tpause PEEP, and Pmax.
Contains information for Total Flow and FGO2 %.
Contains airway pressure, gas flow values, compliance, trends, spirometry and
optional ecoFLOW information.
The digit field can be set to show specific information such as gas
types, gas supply, flow, agent, respiration, and spirometry loops. If
the digit field is set to show agent and no airway module is inserted,
the area is blank.
Paw, O2, and either TVexp or CO2 must show on the display during
a case. If any of these parameters are not selected to show on the
display, the right most digit field information is replaced with the
missing parameter.
See "Screen setup menu" in the "Operation" section for more
information.
Up to three waveforms can be shown on the normal screen view.
Each waveform can be set to show specific Paw, agent, flow, or CO2
data. The corresponding numeric information shows in the measured
values field to the right of the waveform. If the waveform is set to
show the agent and no airway module is inserted, that waveform and
numeric area is blank.
When one waveform is turned off, that waveform and the
corresponding numerics information are removed from the normal
screen view. The remaining waveforms and numerics increase in
size to fill the waveform area. When two waveforms are turned off,
those waveforms and the corresponding numerics information are
removed from the normal screen view. The remaining waveform is
centered in the waveform area.
When in a case, touch the waveform field area to close the menu.
See "Screen setup menu" in the "Operation" section for more
information.
2076152-001
Advertisement
Table of Contents
