Table of Contents
Advertisement
2076152-001
2
1
1.
Holder
2.
Clip
3.
Bag arm base
Figure 2-9 • Bag hose holder
2.
Open cover of the holder at the end of the bag arm and insert
the hose into the holder.
3.
Close the cover of the holder.
4.
Push the hose into the clip on the bag arm.
5.
Bring the hose down through the base of the bag arm and
around the back of the breathing system.
6.
Route the hose between the canister and the system frame.
7.
Attach the hose to the port under the breathing system.
2 System controls and menus
3
1
2
2-9
Advertisement
Table of Contents
