Table of Contents
Advertisement
11. Gas quick keys
12. Split screen
Figure 2-8 • Typical Normal/Full view
Digit fields
Waveform fields
Split screen field
2067226-001
Displays O2, Total Flow, and Gas Setup.
Contains airway pressure, gas flow values, compliance, trends, and optional
ecoFLOW information.
The digit field can be set to show specific information such as gas
types, gas supply, flow, agent, respiration, and spirometry loops. If
the digit field is set to show agent and no airway module is inserted,
the area is blank.
Paw, O2, and either TVexp or CO2 must show on the display during
a case. If any of these parameters are not selected to show on the
display, the right most digit field information is replaced with the
missing parameter.
See "Screen setup menu" in the "Operation" section for more
information.
Up to three waveforms can be shown on the normal screen view.
Each waveform can be set to show specific Paw, agent, flow, or CO2
data. The corresponding numeric information shows in the measured
values field to the right of the waveform. If the waveform is set to
show the agent and no airway module is inserted, that waveform and
numeric area is blank.
When one waveform is turned off, that waveform and the
corresponding numerics information are removed from the normal
screen view. The remaining waveforms and numerics increase in
size to fill the waveform area. When two waveforms are turned off,
those waveforms and the corresponding numerics information are
removed from the normal screen view. The remaining waveform is
centered in the waveform area.
When in a case, touch the waveform field area to close the menu.
See "Screen setup menu" in the "Operation" section for more
information.
The split screen field can be set to show gas metabolics, trends,
spirometry loops, Paw gauge, airway compliance, and optional
ecoFLOW information. If None is selected, the waveforms expand to
fill the split screen area.
2 System controls and menus
2-13
Advertisement
Table of Contents
