Remote Control Box (Optional Equipment) - HONDA marine BF200A Set-Up, Installation, And Pre-Delivery Service

REMOTE CONTROL BOX (Optional equipment)
SIDE-MOUNT REMOTE CONTROL
GEARSHIFT/THROTTLE CONTROL LEVER
NEUTRAL RELEASE LEVER
POWER TRIM/TILT SWITCH
OIL PRESSURE INDICATOR LIGHT
OVERHEAT INDICATOR LIGHT
FAST IDLE LEVER
SPARE EMERGENC
STOP SWITCH CLIP
IGNITION SWITCH
BUZZER (inside)
CONTROL LEVER
FRICTION ADJUST
EMERGENCY STOP SWITCH
EMERGENCY STOP SWITCH CLIP
EMERGENCY STOP SWITCH LANYARD
The fast idle lever is only needed for starting carbureted outboard models. The BF2OOA and BF225A models use programmed
fuel injection so, this lever will not be needed for starting.
After the engine starts and if the outside temperature is below 41°F (5"C), the fast idle lever can be used to accelerate
engine warm up.
N (NEUTRAL)
F (FORWARD1 30"
MAXIMUM FAST IDLE
LOWEST
POSITION
I
FAST IDLE LEVER
16