Customer Responsibilities - Xerox DocuColor 2060 Installation Planning Manual

Customer responsibilities

Installation Planning Guide
Your responsibilities prior to, during, and after installation of the
DocuColor 2060 NPS/IPS system are to schedule and monitor
your installation activities. Refer to the "DocuColor 2060 NPS/
IPS installation planning checklist" and the "Network
preinstallation checklist" in this chapter for a complete list of
responsibilities.
Refer to the "Xerox support services" appendix for information on
services designed to support you prior to, during, and after your
installation.
• Site personnel
– Identify the person (or persons) at your site who will be
the primary interface with Xerox.
– After the installation of your DocuColor 2060 NPS/IPS,
there are a few ongoing tasks that must be performed.
These tasks may include all or some of the following:
• Meter reading and reporting
• Overseeing routine maintenance
• Placing service calls for hardware problems
• Ordering additional documentation, software, or fonts
• Arranging additional operator training
• Maintaining an adequate inventory of consumable
supplies.
It is your responsibility to designate a person (or persons)
to perform these tasks.
• Operator and Administrator training
– Select personnel for Operator and Administration training.
– Set up a training schedule.
• Site preparation
– Select and prepare the site for DocuColor 2060 NPS/IPS
system installation including proper power, air
conditioning, and work space.
– Plan and schedule installation activities.
– For channel-attached systems: Provide your host channel
address to your Xerox representative.
Preparing for installation
4-3