Novell Configuration; Configuring Docucolor 2060 Nps/Ips As A Pserver - Xerox DocuColor 2060 Installation Planning Manual

Table D-1. Print server and remote printer differences (Continued)
DocuColor 2060 NPS/IPS as a PSERVER
Supports user notification of the end of a print
job (completion of printing).
Can send a job ticket that references one file on
the Novell file server to which the DocuColor
2060 NPS/IPS is connected.

Novell configuration

Configuring DocuColor 2060 NPS/IPS as a PSERVER

Installation Planning Guide
DocuColor 2060 NPS/IPS on a Novell network
DocuColor 2060 NPS/IPS as an RPRINTER
Notifies user only when job submission completes
(does not notify user of print completion).
Cannot reference files on a Novell file server.
Once you decide to configure the DocuColor 2060 NPS/IPS as
an RPRINTER or as a PSERVER on your Novell network, there
are a number of tasks you must perform.
The following is a summary of the tasks to perform if the
DocuColor 2060 NPS/IPS is configured as a PSERVER:
• Novell tasks:
– Sign on to the Novell workstation as a network
administrator.
If you use Novell's Quick Setup feature, you must do the
following after creating the queue and server:
– From PCONSOLE, create a Printer Queue (for example,
Gazette) and a Print Server (for example, PGazette).
In the definition of the server, choose Printer Setup.
Define the printer per the naming convention
suggested by NPS/IPS.
Select DEFINED ELSEWHERE.
– From the Print Server window, configure a printer for
PServer using the Printer Configuration option.
– Type any name (for example, Gazette) for the printer.
Select Remote Other/Unknown type for the printer and
save the information.
CAUTION
D-9