Xerox DocuColor 2060 Installation Planning Manual page 75

Network Information
Hostname
IP address for primary net device
IP netmask for primary net device
IP address for secondary net device #1 (if applicable)
IP netmask for secondary net device #1 (if applicable)
IP address for secondary net device #2 (if applicable)
IP netmask for secondary net device #2 (if applicable)
IP address for secondary net device #3 (if applicable)
IP netmask for secondary net device #3 (if applicable)
Primary network device
Default router
Secondary network devices (if applicable)
Superuser password
Accounting information
Xerox client software
lpr and lpd
UNIX command tool
Retry count
Installation Planning Guide
Choose a framing type used by the file server that communicates
with DocuColor 2060 NPS/IPS. If you are using print server or
remote printer, and have the DocuColor 2060 NPS/IPS
communicate with a different machine for each, then choose a
framing type that is used by both of the machines.
If you are installing a new Novell network using Ethernet, it is
recommended that you choose the ETHERNET__II framing type
for the file server and the DocuColor 2060 NPS/IPS. If you are
using Token Ring and the Novell server has both TOKENRING
and TOKEN RING_SNAP enabled, use TOKENRING on the
DocuColor 2060 NPS/IPS. For FDDI networks running Novell, it
is recommended that you choose the FDDI framing type.
Table 4-2. Network preinstallation checklist
Preparing for installation
Information you supply
4-13