System Connections; Cable Lengths - Xerox DocuColor 2060 Installation Planning Manual

Cable lengths

Data cables
Power cables
Installation Planning Guide
7.

System connections

This chapter provides cable requirements for your DocuColor
NPS/IPS system. To ensure all of your cable requirements are
met, it is important to work with your Xerox representative.
Cable lengths are important considerations in planning your
layout, as components can be separated only up to the length of
the data interface cables that connect them.
Cables supplied with the printer are long enough to meet the
needs of most installations. Some of these cables are specific
lengths to conform to engineering and safety standards.
The printer components can be separated up to the length of the
data interface cables that connect them. The printer and
controller are connected by a 25-foot / 7.5 meter data cable.
Power cable lengths for the 60 Hz environment are as follows:
Table 7-1. Power cable lengths
Power cable
Printer controller
Printer
Table 7-2. Power cable lengths
Power cables
Printer controller
Peripheral cabinet
Printer
Length
8 feet / 2.4 meters
10 feet / 3 meters
Length
15 feet / 4.6 meters
15 feet / 4.6 meters
15 feet / 4.6 meters
7-1