Table 4-1. DocuColor 2060 NPS/IPS installation planning checklist (Continued)
Week
Activity
-1
•
Schedule operator training.
•
Define parameters needed to
configure PSF for connectivity to
the NPS/IPS printer.
Install
•
Ensure supplies are available.
•
Ensure system administrators are
available during software
installation.
•
Provide preinstallation checklist
and network address of print
server (or host file containing this
information) to Xerox personnel.
Also, designate two client
workstations if applicable, for
Xerox client software installation.
•
Provide host channel address and
channel unit address (if printing
via channel).
•
Provide host IP address.
•
Sysgen your host to print to an
AFP Type 1, Group 3 printer.
•
Set up Data Transfer Mode.
•
Install DocuColor 2060 NPS/IPS
system hardware and software.
•
Load Xerox client software on
client workstations.
•
Have operators available for
training.
•
Check documentation and
software kits for completeness.
•
Have test jobs ready to run.
•
Provide stocks needed for default
input configuration.
•
Provide parameters needed to
configure PSF for connectivity to
the NPS/IPS printer.
Post-
•
Become familiar with support
install
services available.
•
Establish supplies ordering
procedure.
•
Provide ongoing printer controller
and DocuColor 2060 NPS/IPS
printer maintenance.
•
Adjust the printer alignment and
magnification.
•
Order additional documentation,
as necessary.
Installation Planning Guide
Preparing for installation
Reference
Responsibility
Systems analyst
Customer and
Xerox
Chapter 4 and
Customer
Appendix A
Customer
Chapter 4
Customer
Xerox
Customer
Customer
Customer
Customer
Customer
Customer
Appendix B
Customer
Customer
Appendix A
Guide to
Customer and
Performing
Xerox
Routine
Maintenance
Xerox
Customer
Appendix B
Date
completed
_________
_________
_________
_________
_________
_________
_________
_________
_________
_________
_________
_________
_________
_________
_________
_________
_________
_________
_________
_________
4-7