Planning for the installation
Customer responsibilities
Site personnel
Site selection and
preparation
Training
Client
workstations
Applications
Installation planning tasks
3-2
Your responsibilities prior to, during, and after installation of the
DocuTech printer are:
Identify a person at your site to be the primary interface with
Xerox.
Select and prepare the site for the DocuTech printer installation.
The following electrical, telephone, and network services are
required:
•
Refer to the chapter, "Select and prepare an installation site",
for the necessary electrical requirements for your site.
•
One 10BaseT or 100BaseT Ethernet connection for the
controller.
•
One telephone line
For additional details, refer to the chapter, "Select and prepare
an installation site".
•
Select personnel to train.
•
Set up training schedule.
Make sure all client workstations that will be submitting print jobs
have the proper hardware, operating system, and networking
software required by the DocuTech printer as client platforms.
Work with your Xerox systems analyst to determine
requirements for initial applications.
To aid you in installation planning, this section provides a list,
describing tasks you and your Xerox representative must
complete in the weeks before scheduling installation. If you have
questions about any of these activities, contact your sales or
service representative.
DocuTech 61xx Installation Planning Guide