As/400 Parameters; Software Prerequisites - As/400; Network Configurations - As/400 - Xerox DocuColor 2060 Installation Planning Manual

AS/400 parameters

Software prerequisites – AS/400
OS/400
V3R7
V3R7
V3R2
V3R2
Network configurations – AS/400
Installation Planning Guide
Defining the printer to the host: TCP/IP attachment
This section describes the process of configuring an AS/400
system to communicate and print using TCP/IP. This process is
applicable to either a Token Ring or an Ethernet LAN.
This information applies to all AS/400 RISC models with OS/400
V3R7 (or higher) installed.
The following prerequisite software packages must be installed
on your host system before you begin the configuration process
described in the following pages. Ensure that you are using the
manuals for the proper software releases.
Table F-13. AS/400 software prerequisites
Licensed Description
program
5716TC1 TCP/IP Connectivity Utilities for AS/400
5716SS1 OS/400—Print Services Facility/400
5763TC11 TCP/IP Connectivity Utilities/400
5763AF1 Advanced Function Printing Utilities/400
The printer is supported in all the following types of AS/400
configurations, provided that the software prerequisites are
installed.
• Basic configuration in which the AS/400 is attached to a LAN
using either a Token Ring or Ethernet network adapter card
• Remote LAN environment in which there are data
communication links between the AS/400 and the LAN-
attached controller
• Configurations in which the LAN with the printer attached is
connected to the host-attached controller using LAN devices
such as routers.
Product
option
*BASE
N/A
N/A
N/A
F-21