Printer Hardware Specifications And Requirements Summary - Xerox DocuColor 2060 Installation Planning Manual

Printer specifications and requirements

Printer hardware specifications and requirements summary

Table 6-6. Printer specifications and power requirements
Device
Printer with standard
(three-tray) feeder
Tray 4 (high-capacity
feeder, or HCF)
High-Capacity Stacker
(HCS)
High-Capacity Stacker
Stapler (HCSS)
6-18
The following table summarizes the specifications and electrical
requirements of your printer hardware components.
For a summary of controller specifications and requirements,
refer to the "Controller specifications and requirements" chapter
of this guide. Contact your service representative if you have
questions not specifically addressed in this guide.
Dimensions
(width, depth, Total
height) Weight
w=92.3"/ 2380 mm 1874.25
d=37.x"/ 950 mm lbs./ 850
h=55.6"/ 1412 mm kg.
Minimum space
required:
w=154.5" /3905 mm
d=125" /3167 mm
w=48.07"/ 1221 mm 425 lbs./
d=29.53"/ 750 mm 192.95 kg
h=55.6"/ 1412 mm
Minimum space
required when
attached to printer:
w=192.5" / 4870
mm
d=125" / 3167 mm
w=45.28"/ 1150 mm 342 lbs./
d=26.77"/ 680 mm 155 kg
h=43.70"/ 1100 mm
Minimum space
required when
attached to printer:
w=183.3" / 4643
mm
d=125" / 3167 mm
w=35.2"/ 895 mm
d=24"/ 600 mm
Minimum space
required when
attached to printer:
w=183.3" / 4643
mm
d=125" / 3167 mm
Heat dissipation
60 Hz and 50 Hz:
Operating: 12,300
BTU per hour
Standby: 7,936 BTU
per hour
60 Hz and 50 Hz:
Operating: 5,100 BTU
per hour
Standby: 5,100 BTU
per hour
60 Hz and 50 Hz:
Operating: 4,700 BTU
per hour
Standby: 550 BTU per
hour
Installation Planning Guide
Power
requirement
s
60 Hz and 50
Hz:
4.8 KVA max.
(operating
mode)
60 Hz and 50
Hz:
1.5 KVA max.
(operating
mode)
60 Hz and 50
Hz:
1.5 KVA max.
(operating
mode)
60 Hz and 50
Hz:
1.5 KVA max.
(operating
mode)