Xerox DocuColor 2060 Installation Planning Manual page 176

Defining the printer to the host: TCP/IP attachment
Table F-7. TCP/IP Profile dataset parameters – MVS
Item description
DATABUFFERPOOLS
IZE
Data buffers
DATABUFFERPOOLS
IZE
Buffer size
SMALLDATABUFFER
POOLSIZE
TINYDATABUFFERP
OOLSIZE
KEEPALIVEOPTIONS
GATEWAY
max_packet_size
F-14
NOTE: It is not necessary to define the printer in TCP/IP for
MVS, because the printer acts as a conduit from the MVS
system to the LAN. However, some settings in the TCP/IP Profile
dataset may need to be altered, depending on your current
settings.
Source of
Default value
160 Installation
preferences
16384 Installation
preferences
0 Installation
preferences
0 Installation
preferences
Interval Installation
120 preferences
sendgarba
ge false
Defaultsize Installation
is 576 preferences
Range of
acceptable
values Comments
7 to nnnn, where Specify at least
nnnn is limited by 160 buffers.
available virtual
storage
8192 49152 Specify a buffer
12288 65536 size of at least
16384 98304 32768, if possible.
24576 131072
28672 196608
32768 262144
0 to nnnn, where Specify at least
nnnn is limited by 256 small data
available virtual buffers.
storage
0 to nnnn, where Specify at least
nnnn is limited by 256 tiny data
available virtual buffers.
storage
See Notes.
Can be from 576 Max packet size
to 67108864, but parameter should
cannot be larger be no greater than
than value 4472 bytes in a 4
specified on Mbps LAN
LARGEENVE configuration, and
LOPEPOOLSIZE 17800 in a 16
statement. Mbps LAN
configuration.
Default MTU value
in printer is 2052.
Installation Planning Guide
Your
value