List Of Terms - Xerox DocuColor 2060 Installation Planning Manual

List of terms

A3
A4
American
Standard Code for
Information
Interchange
(ASCII)
AppleTalk
application
software
abort
alignment
alphanumeric
American
Standard Code for
Information
Interchange
(ASCII)
AppleTalk
application
software
argument
attribute
Installation Planning Guide
This section contains a list of terms you may need while working
with the DocuPrint NPS/IPS, and a definition of each.
Paper size measuring 297 by 420 mm.
Paper size measuring 210 by 297 mm.
Standard 7-bit code which represents alphanumeric information.
Each alphanumeric character and several nonprinting characters
are assigned a binary number, covering 128 possible characters.
It is used for information interchange among data processing
systems, data communication systems, and associated
equipment.
Network communication protocol inherent to the Apple
Macintosh operating system and supported by the DocuPrint
NPS.
Software resident on the host or client workstation used to create
print documents.
To terminate printing, program, or nonprinting execution before it
completes.
The positioning of an image on a page for printing.
Set of characters including the letters A through Z, numerals 0
through 9, and all printable special symbols.
Standardized code that represents letters, numbers, and other
characters established by the American National Standards
Institute (ANSI) to achieve compatibility between data
processing and data communications equipment.
Network communication protocol suite inherent to the Apple
Macintosh operating system and supported by the DocuPrint
NPS/IPS.
Software resident on the client workstation used to create print
documents.
Any word (string of characters separated by spaces or tabs) after
the command in a command line.
Set of attributes available for controlling the processing of a print
job. Print attributes include simplex or duplex printing, media
selection, collating, stitching, and so on. Print attributes can be
sent to the Printer Controller as part of the job, providing
automatic job processing. They also may be associated with
virtual printers, which may then assign the attribute to the job.
Glossary
3