Name and symbol
Function
Features
Not used for DocuColor 2060 NPS/IPS.
Power Saver
Puts the system in a standby status mode, where the fuser temperature is lowered.
The factory default is 60 minutes. The power saver time out can be changed in
Tools to reflect a value from 1 to 240 minutes.
Job Status
Displays a list and the current status of all jobs submitted on the touch screen.
The option to hold, release, promote, delete and see the options selected for each
job in the queue should not be used for DocuColor 2060 NPS/IPS. These
functions must be performed at the printer controller.
Installation Planning Guide
Figure 3-4. Printer control panel with international symbols
The function of each button is described in the following table.
NOTE: All functions may not be activated for your system.
Table 3-1. Control panel buttons
Printer components and options
CAUTION
3-5