Table of Contents
Advertisement
2.
Press the <Delete Job> button.
This starts the cancellation process. [Off-line]
reappears after the process is complete.
All data:
Deleting...
Off-line
3.
Press the <Online> button.
The [Ready to print] screen reappears.
Ready to print
K
C
M
Y
Importing Printer
Information to a Print
Driver
If your printer is networked, you can import printer
information (such as accessory configuration, and
sizes and types of paper in the paper trays) into
your print driver using SNMP protocol. This can be
done on the [Options] tab on your print driver. The
following procedure is described based on
Windows XP. After installing the print driver, use
this procedure to add options and configure paper
settings.
Note
• This function is not available when the printer is being
used as a local printer. In this case, configure settings of
the applicable print driver items manually. Also note that
during use as a local printer, the paper types and paper
sizes loaded in the trays are not displayed.
• To use this function, the control panel must be used to
enable the printer's SNMP port (Initial default:
[Enabled]).
• With Windows 2000, Windows XP, and Windows Vista,
settings can be changed only by a user with
administrator privileges. Users without administrator
privileges can only view the settings.
1.
On the [Start] menu, select [Printers and
Faxes] and display the properties of the
printer being used.
2.
Click the [Options] tab.
36
2 Basic Operation
3.
Click [Get Information from Printer].
The printer information is imported to the
print driver.
4.
Click [OK].
The contents of the [Options] tab are
updated using the information obtained from
the printer.
Note
• The paper sizes and orientations displayed in [Paper
Tray Attributes] are those automatically detected by the
printer.
• The paper type and color in [Paper Tray Attributes] is
based on readings of settings configured with the
control panel.
Printing a Report/List
The reports/lists can be printed using the control
panel. The procedure below shows how to print
the [Configuration Report]. The same basic
procedure can be used to print the other reports
and lists.
1.
Press the <Menu> button on the control
panel to display the menu screen.
Menu
LanguageEmulation
2.
Press the < > button until [Print Reports] is
displayed.
Menu
Print Reports
3
4
Advertisement
Table of Contents
