Cleaning The Touchscreen; Amp Fuse Replacement - 3D Systems Cube 2nd Generation User Manual

Cleaning the Touchscreen

• Wipe the touchscreen with the soft, lint-free cloth. Do not spray cleaners on the
touchscreen.

4 Amp Fuse Replacement

Caution: Before replacing the fuse, switch Cube's power off and unplug power cord.
1. 4 Amp, 250V fast blow fuse is located on the back left side of your Cube.
2. Using a flat screwdriver, turn screwdriver counterclockwise to remove fuse from the fuse holder.
3. Using a flat screwdriver, turn screwdriver clockwise to install new fuse into the fuse holder. After new fuse is
installed, plug power cord into outlet and switch power on.
54