Advertisement
Advertisement
Table of Contents
Related Manuals for 3D Systems Geomagic Touch
Summary of Contents for 3D Systems Geomagic Touch
- Page 1 Geomagic Touch Haptic Device Quick Start Guide...
- Page 2 GEOMAGIC TOUCH QUICK START GUIDE This quick start guide is a high-level overview of the steps you need to take to install, connect, and start to use the Geomagic Touch haptic device. For detailed information, see the Geomagic Touch User Guide available on the http://support.geomagic.com...
- Page 3 LAN port. • Host Name to match the Geomagic Touch serial number (located on the bottom of the device) to the corresponding device in this list (this could take up to 3 minutes depending on your network connection). Click the Pairing button in the Geomagic Touch Setup window.
- Page 4 You must press the Pairing button before the progress bar times out – you have about 15 seconds (see image below). If the progress bar times out before you have pressed the Pair button – repeat step 8. 3D Systems, Inc.
- Page 5 Green (see image) when the device is properly calibrated. 15. Complete the remaining Geomagic Touch tests. When complete, click the red X in the top right corner to exit the Geomagic Touch Diagnostic. Go to http://support.geomagic.com...
Need help?
Do you have a question about the Geomagic Touch and is the answer not in the manual?
Questions and answers