Ethernet Port
The Ethernet port is the default interface used on the WorkCentre 4118 / FaxCentre 2218.
NOTE:
Ethernet Port Setup
If the speed setting of the Ethernet port needs to be changed perform the following steps:
Connect the device to the network outlet or cable.
1
2
Press the [Machine Status]
button.
3
Press
Admin Tools displays and press
[Enter].
If the System Admin Tools have
been passcode protected, type in
the password and press [Enter].
4
Press
Setup displays and press [Enter].
Xerox WorkCentre 4118 and FaxCentre 2218 System Administration Guide
The Ethernet port cannot be disabled.
or
until System
or
until Network
Machine Setup
Fax Setup
System Admin Tools
[Passcode Protect]
System Admin Tools
[Network Setup]
Page 2-3