Print-Quality Problems - Xerox EC8036 User Manual

Print-Quality Problems and Solutions
Use the following table to find solutions to print-quality problems.
Note: At the printer control panel, press the Home button. Touch Device > Information Pages
> Troubleshooting Print Quality Page > Print.
Problem
Smears, Smudges, and Streaks
Dark or light marks appear on your output.
Repeating Spots or Lines
Spot or lines appear at regular intervals on the prints.
Colors Look Wrong
Colors are off or look drastically wrong.
Colors Too Light or Too Dark
The print or color density is too light, missing, or the
background is foggy.
Solution
Run a print job consisting of several blank pages
through the printer to remove toner accumulated on
the fuser.
If the problem persists, print the test pages to help
determine which component is causing the image-
quality problem.
• If the defect occurs in one color only, replace the
corresponding imaging unit.
• If the defect occurs in all colors and is visible on
all the test pages, replace the fuser.
1 To identify the part of the printer that is causing
the problem, print the Repeating Defects page. At
the control panel, press the Home button, then
touch Device > Tools > Troubleshooting >
Support Pages > Repeating Defects Page >
Print.
2 To identify the part responsible for the repeating
spots or lines, follow the instructions on the
Repeating Defects page.
3 To correct the problem, replace the printer part
identified on the Repeating Defects page.
1 Verify that the printer is on a solid, level, and flat
surface.
2 Perform the Print Calibration procedure. At the
control panel, press the Home button, then touch
Device > Tools > Troubleshooting > Calibration >
Print Calibration > Next, then follow the
instructions.
1 Verify that the paper you are using is the correct
type for the printer and is loaded properly. For
details, see Supported
2 Verify that the paper loaded in the tray matches
the paper type selected at the control panel and
in the print driver.
3 To print procedures on resolving print-quality
problems, at the control panel, press the Home
button. Touch Device > Information Pages >
Troubleshooting Print Quality Page > Print.
Xerox ® EC8036/EC8056 Color Multifunction Printer
Troubleshooting
Paper.
User Guide
309