Configuration and Setup
How to get here
Tools Screen 1
More
Tools Screen 2
Configuration
and Setup
Any changes to the configuration require a system reboot.
50/60 Hz
The correct Hertz setting for your location has been made at the
factory prior to installation. Do not change it. If you have any
questions contact the Welcome Center.
Document Scanner Cover Color
A white cover is standard, but gray is available as a separate
installable kit. A gray cover allows the Auto features (Auto%, Auto
Paper, and Auto Center) to be used with the cover closed. If a gray
cover is installed, this button must be changed to gray.
Optional Services
After any of the optional network services (Scan, Network Fax or
Network Accounting) are installed on your Document Centre, use
this feature to enable them.
This feature should be enabled after the optional services are
installed. Refer to the specific chapters for more information on
installing the optional services.
Paper Tray Registration Setup
If you need to reregister the paper tray alignment to ensure the
highest print and copy quality, press this button and follow the
screen instructions.
Page 9 - 44
Xerox Document Centre Reference Guide