Hardware Component Diagram - Xerox Document Centre 240 Reference Manual

Hardware Component Diagram

The main components of the Document Centre are identified in the
diagram below. Your configuration may differ slightly, depending
on the options installed on your machine.
Scan your originals once using the
Document Feeder.
or
Use the Document Glass underneath the
cover to scan originals that will not feed
through the Document Feeder.
Use the Convenience
Stapler to restaple your
originals.
Use Tray 5 for odd
size or special
stock.
Use Tray 6 and its 3100 sheet capacity of
8.5 x 11-inch paper as your main paper
source.
Page 3 - 2
Touch the Screen to make your copy
selections. Use the buttons to access
other features.
Turn the machine on/off here.
Use the Finisher to
create single or dual
stapled sets.
Trays 1 to 4 hold many
types of stock.
Xerox Document Centre Reference Guide
= Off
= On