Output Options; Thin Stapled Sets - Xerox Document Centre 240 Reference Manual

Output Options

How to get here
(On an ST model)
Tools Screen 1
System Setting
System Setting
More
System Settings 2

Thin Stapled Sets

More
This option and one or more of its options may or may not appear
System Settings 3
depending on your hardware configuration. Stapling thin sets (sets
between 2 and 15 sheets of paper) poses a special challenge because
Output Options
of the rise in paper caused by the added thickness of the staple.
Thickness caused by staples
(On a DC model)
Tools Screen 1
System Setting
This button allows you to change the following:
l
System Settings 1
More
l
System Settings 2
l
Output Options
Xerox Document Centre Reference Guide
The number of sheets the machine will consider as a thin
stapled set.
The number of thin stapled sets that will be produced before the
machine will automatically pause.
What the machine will do after it pauses. It will either
automatically resume or remain paused.
System Tools
Page 9 - 33