Resetting The Feed Roll Cartridge Counters - Xerox Document Centre 240 Reference Manual

Resetting the Feed Roll Cartridge Counters

NOTE The Paper Feed Roll counter must be reset whenever a Feed Roll is
replaced. If the counters are not reset, paper misfeeds will likely
occur from the paper tray with the newly changed Feed Roll.
To reset the counters follow the instructions below:
1. Press the Access button.
2. Enter the Access login password. Press the Go to Tools button.
3. Select More to access the second tools screen.
4. Select Supplies Management.
5. Select Feed Roll Cartridge Replacement. The following
6. Open a tray or the Document Feeder and change the cartridge.
7. Close the tray or Document Feeder in which you replaced the
8. Confirm the Cartridge replacement on the pop-up screen. This
9. Select Close.
10. Select Exit Tools.
11. Return the old Feed Roll Cartridge to Xerox.
Xerox Document Centre Reference Guide
screen should appear. This screen must be showing to reset a
Feed Roll counter.
Replace the Feed Roll at the top of the list because this is the one
with the shortest remaining life.
cartridge. A pop-up screen will appear.
will reset the counter.
System Tools
Page 9 - 41