Power On Procedures - Xerox Document Centre 240 Reference Manual

Power On Procedures

The Power switch is the white switch located on the right side of the
machine. Press the ( ) symbol toward the back of the machine in
order to turn the power on.
When the Basic Copying Screen appears, your job can be
programmed. As soon as the screen displays the message, Ready to
Scan your Job, jobs may be scanned. Jobs will not print until the
fuser is ready.
ON
The entire powering up process typically takes approximately 4
Power
minutes for a Document Centre 470/460/265/255 DC and 5.5
switch
minutes for the Document Centre 240 DC.
An ST model will require an additional 2-4 minutes while the
network connections are restored. Copy jobs can be made while the
network connections are restored.
Page 14 - 2 Xerox Document Centre Reference Guide