Setting Up Network Accounting - Xerox Document Centre 240 Reference Manual

Setting Up Network Accounting

How to get here
Use the following steps to setup the network accounting option:
Tools Screen 1
1. Arrange for a software and hardware upgrade.
Access and
Accounting
Access and
Accounting
Authentication
2. Install the Upgrade on the Document Centre.
Mode
Authentication
Mode
3. Ensure the Document Centre has TCP/IP and HTTP protocols
Network
Accounting
Xerox Document Centre Reference Guide
Contact Xerox to arrange for a Document Centre hardware and
software upgrade as well as delivery of software such as
EQUITRAC System 4 OfficeTrac
A Xerox representative will install or upgrade the Document
Centre hardware and software.
enabled.
Your computer network administrator has to enable TCP/IP and
HTTP protocols otherwise Network Accounting will not work
on your machine.
Go to Tools and press the Connectivity and Network Setup
button on the first Tools Screen. There will be a delay as the
network information is gathered. Press the Network Setup
button. Press the TCP/IP options button and a screen such as the
one shown below should appear.
Press the TCP/IP Settings button. This will display a new screen.
On the new screen, enable HTTP protocol by pressing the HTTP
button.
Press Exit Tools.
System Tools
TM
.
Page 10 - 23