Xerox Document Centre 240 Reference Manual page 297

Problem Symptom
The Finisher does not
staple or staple well
Output
Quality
The machine did not
enlarge an 8 1/2 x 11 inch
document to fill an 11 x 17
inch page
Stray marks or black marks
from three-hole punched
originals are not removed
Images are out of sequence
or upside down when the
Booklet Creation Feature
is used
Xerox Document Centre Reference Guide
Recommendation
l
The finisher does not staple uncollated
stacks for more than 50 sheets of 20 lb.
paper.
l
Use less than 50 sheets of paper if they are
heavier than 20 lb.
l
Check the User Interface for a fault
message indicating no staples. Replace the
staple cartridge.
l
Ensure that the correct tray is selected.
l
11 x 17-inch paper can be loaded in the
trays short edge feed only. Select Reduce/
Enlarge, More...then Custom then Auto%.
l
Orient the original SEF. If using the
Document Feeder, ensure the document
Size is correctly defined. Refer to page 12-
18 for more information.
l
Use the Edge Erase to erase the edge with
the drilled holes.
l
Copy from the document glass with the
Document Cover down.
l
Ensure that the originals are in the correct
sequence.
l
Feed LEF originals to SEF orientated paper
stock.
l
Enable the display options for Booklet
Creation and ensure that the correct
sequence is selected (i.e., Left to Right or
Right to Left).
Page 15 - 9