Xerox Document Centre 240 Reference Manual page 207

5. Install the EQUITRAC System 4 OfficeTrac
6. Upgrade Client Print Drivers.
This box must be
checked
Xerox Document Centre Reference Guide
The documentation that accompanies the EQUITRAC® system
contains the procedures for establishing communications
between the EQUITRAC System 4 OfficeTrac
networked Document Centre. The person who is responsible for
your computer network should install the software.
Using the EQUITRAC System 4 OfficeTrac
create the User and Account IDs.
Distribute new Print Drivers containing the Network
Accounting option. If possible, distribute these drivers with the
Accounting option already selected. The Print Drivers are part of
CentreWare software.
If the drivers are distributed without the option enabled,
workstation users will need to configure the drivers. If they do
not properly configure the driver, jobs sent to the Document
Centre will be deleted.
Generally, the Network Accounting Enable box on the driver is
found by clicking on the Network Accounting enabled
Document Centre Printer and selecting either Properties or
Document Defaults from the file pull down selection.
Check the Enable Accounting box and any other boxes you wish.
Close the window when you are through.
You should see a screen similar to the one shown below.
System Tools
TM
software.
TM
software and a
TM
documentation,
Page 10 - 25