Xerox Document Centre 240 Reference Manual page 268

Table 3: Non-standard paper performance
GBC-brand or pre-punched
with rectangular holes: (holes on long edge)
This type of paper only works when the
holes are at the rear of the paper tray.
Never Tear type
Drafting film
Perforated: perforations are parallel to the feed direction
perforations are perpendicular to the feed direction
Envelopes (standard medium to large letter size)
Tabs
Carbonless
Textured Papers, Vellum Bristol papers
Smooth Cover Index Stock
Window Stock
Page 13 - 8
LEF
SEF
Paper loaded in a tray,
with holes at rear of tray
** Same performance as shown in Table 1 for the
corresponding paper sizes.
(d) Refer to Table 5 or to the paper tray label for the correct
paper loading orientation.
(e) Embossed letterhead may cause degraded paper
handling, and possibly minor image deletion defects
near the embossed area on either side of the paper.
(f) Refer to Table 5 for more information.
(g) This note is not used.
X
❍
(d)
❍
❑
❍
(i)
❑
(i)
X
X
❑
X (l)
❍
X
Xerox Document Centre Reference Guide