Xerox Document Centre 240 Reference Manual page 241

Table 8: System Settings Defaults
Feature Area Options
Measurements
Units Inches or mm
Numeric Comma or Period
separator
Set Time and Time
Date
12 -24 hr
Date
mm/dd/yy
dd/mm/yy
yy/mm/dd
Timers
System Disable or Enable
Timeout
1 to 10 mins
Incomplete Disable or Enable
Scan
1 to 10 minutes
Auto Resume Disable or Enable
0.25 to 2 minutes.
Xerox Document Centre Reference Guide
Factory Default Explanation and Notes
Inches Sets the appropriate
measurement units.
Comma Sets the standard numeric
separator.
24 hr Use this function to set and
format the date and time used
dd/mm/yy
by the machine.
To modify the date and time
settings, follow the
instructions displayed on this
feature.
Enable, 1 minute Controls the amount of time
until the Touch Screen is reset
to the default settings.
Enable, 3 Controls the amount of time
minutes between an incomplete job that
is partially scanned into
memory and its deletion from
memory.
If a job is partially scanned into
memory and the originals have
been removed from the
Document Feeder for this
amount of time, the job will be
deleted.
Enabled Controls the amount of time
that elapses between when a
0.5 minutes.
job is paused and when it will
resume printing automatically.
Page 12 - 15