Operational Safety - Xerox Document Centre 240 Reference Manual

Operational Safety

Xerox equipment and supplies have been designed and tested to
meet strict safety requirements. These include safety agency
examination, approval and compliance with established
environmental standards.
To ensure the continued safe operation of your Document Centre,
follow these safety guidelines at all times:
Always Do These
l
l
l
l
l
l
NOTE Your Document Centre is equipped with an energy saving device to
conserve power when the machine is not in use. The machine may
be left on continuously.
Page 1 - 6
Always connect equipment to a correctly grounded power
outlet. If in doubt, have the outlet checked by a qualified
electrician.
Always follow all warnings and instructions that are marked on
or are supplied with the equipment.
Always exercise care when moving or relocating the
equipment. Please contact your local Xerox Service Department
to arrange relocation of the machine to a location outside of
your building.
Always locate the machine on a solid support surface (not on
plush carpet) that has adequate strength to support the weight of
the machine.
Always locate the machine in an area that has adequate
ventilation and room for servicing.
Always use materials and supplies that are specifically designed
for your Xerox equipment. Use of unsuitable materials may
result in poor performance and possibly a hazardous situation.
Xerox Document Centre Reference Guide