Copying Procedure; Load The Documents - Xerox Document Centre 220 User Manual

Copying procedure

1. Load the documents

Page 3-2
Before making copies on the Document Centre
220/230/332/340 , you need to determine what you want to
copy and how many copies you want to make. There are 6
simple steps to follow when making copies:
1. Load the documents
2. Press the Features button to display the first Copy
screen
3. Select the features
4. Enter the quantity
5. Press Start
6. Identify the job in the Print Queue in Job Status
mode
NOTE: If the Auditron has been enabled on the machine, an
account number may be required before programming can
commence. For user allocation, or further information about
the Auditron, please contact your Key Operator.
A choice of document input areas is available. These are:
- A document feeder for multiple documents
- A document glass.
Document Feeder
Up to 50 documents can be scanned at one time using the
document feeder. Ensure the documents are of the same
size, in good condition and all staples or paper clips are
Copy