Symptom
Deformed transparencies
Annotation did not work
Machine does not edit
Inserts have images printed on them
Drilled paper holes are on the wrong side
Page 10-6
Recommendation
À
Check to see if Transparencies is
selected on the touch screen. The
machine automatically adjusts for
different types of media. Paper can
tolerate more heat than
transparencies.
À
Use the Left Tray instead of the Center
Tray.
À
Check features programmed.
Annotation cannot be used with N Up
(2 Up on the Document Centre
220/230 ), Booklet Creation, Gray
Scale Copying ( Document Centre
220/230 ), Build Job, uncollated copies,
custom size documents, or Bound
Documents. Re-program the job.
À
Replace the editing marker.
À
Insert blank sheets of paper with the
documents to mark each location for
an insert.
À
For double-sided copying using drilled
paper, load the paper the opposite of
the single sided copying instructions
on the tray. This is because the
machine copies the second side of a
document first.
Problem Solving