Xerox Document Centre 220 User Manual page 245

Symptom
Washout
Solid density variations
Image loss
Output does not reflect the selections
made on the touch screen
The Finisher does not stack output
correctly
Xerox Document Centre 220/230/332/340 User Guide
Recommendation
À
Check the quality of the documents.
À
If the image is lighter near the borders,
select a darker Image Quality setting
on the touch screen.
À
Replace the Copy/Print Cartridge.
À
Check the quality of the documents.
À
Select Lighter or Darker on the touch
screen.
À
Replace the Copy/Print Cartridge.
À
When copying a document from a
larger paper size to a smaller size,
reduce the image to fit onto the smaller
paper size.
À
If you are using 8 1/2" x 11" size paper,
reduce the document slightly (copying
90% instead of 100%).
À
Select Auto Center on the touch
screen.
À
Press Save after each selection on the
touch screen that contains a Save
button.
À
Check to see if the paper tray guides
are locked into position against the
paper.
Page 10-11