Copying; Copying Procedure - Xerox WorkCentre 5016 User Manual

5 Copying

Copying Procedure

Xerox WorkCentre 5016/5020 User Guide
Downloaded From ManualsPrinter.com Manuals
This chapter describes the basic copying procedure and copy features available on the
machine.
This section describes the basic copy procedure.
• If the machine is in the No Account Mode, proceed to Step 1.
• If the machine is in the Single Account Mode, refer to "Logging in to the Machine"
(P.68) under "Single Account Mode" to log in to the machine before proceeding to
Step 1.
• If the machine is in the Multiple Account Mode, refer to "Logging in to the Machine"
(P.69) under "Multiple Account Mode" to log in to the machine before proceeding to
Step 1.
1.
Load a document.
• When copying a document from the Document Feeder
1) Place a document face up in the
center of the Document Feeder.
Note • The indicator on the Machine
Diagram (mimic) lights up when a
document is loaded correctly in the
Document Feeder.
2) Adjust the document guides to just
touch the edges of the loaded
document.
Note • If the size of the loaded document
is smaller than any standard sizes,
the edges of the loaded document
may create shadow, and may
appear to have an outline on the
copied output.
52