Original Size (Original Input - Document Centre 220/230) - Xerox Document Centre 220 User Manual

Original Size (Original Input - Document Centre 220/230 )
À
Place a document on the
document glass.
À
Select the features, touch
Image Adjustment and then
Original Size ( Original Input
on the Document Centre
220/230).
À
Touch Original Size.
À
Use the up/down scroll
arrows until the correct size is
displayed.
À
Touch the required size and
select Save . If the size is not
available in the list, use the
up / down scroll arrows
located by the X and Y
display area to enter the size.
À
Select Save.
À
Enter the quantity.
À
Press Start .
Page 3-26
Use this feature to copy and/or manipulate non-standard
size documents from the Document Feeder and Document
Glass. Use the following steps to program this feature on the
Document Centre 332/340 .
HINT: Touch the X / Y display areas to display the pop-up
keypad which can be used to input and save the values.
Copy