Xerox Document Centre 220 User Manual page 110

Page Numbering displays page numbers.
Comments displays a comment on the document. On the Document
Format ( Document Centre
332/340 )
Page 3-46
On the Document Centre 332/340 page numbers can be
added to the left, right, and center and at the top or bottom
of a page. On the Document Centre 220/230 page numbers
can be added to the left, right, and center of the top of a page
only.
Centre 332/340 a comment can be added to the left, right,
and center and at the top or bottom of a page. On the
Document Centre 220/230 a comment can be added to the
left, right, and center of the top of a page only.
Choose a programmed comment or create your own by
selecting Enter . Refer to the instructions on the next page for
creating a comment.
there are three options available in this screen. Each option
is available with any one of the annotations.
- orientation informs the machine the orientation
(landscape or portrait) of the document. The machine
then uses this information to determine what side of the
page to place the annotation.
- font size offers a choice of two fonts. Small font size is
set at 72 dots and the large font size is set at 144 dots.
- write mode prints the annotation on to the page as
either transparent or opaque. Selecting Transparent
means that the image on the document is not deleted
and the annotation is placed on top of the document
image. Selecting Opaque means that the annotation
replaces the document image.
HINT: If the document contains an image or text that
extends to the top edge of the page, reduce the image to
approximately 90% of its document size to make room for
annotation. Otherwise, the annotation might be printed on
top of the text or image.
Copy