Xerox Document Centre 220 User Manual page 193

Error Condition
Novell is not enabled on the device and the
job specifies a Novell file server.
Server cannot be reached.
Invalid login.
The specified directory path does not exist.
The specified directory path and folder
name are being used by another device.
File server full.
Xerox Document Centre 220/230/332/340 User Guide
- <Folder Name>.dat is an ASCII test file containing a
directory listing of all files within the directory.
- <Folder Name>.xst is a copy of the job template used
to scan the document.
- XSMDESC.dat is an ASCII file that contains the
document name.
- NEXTNAME.dat is an ASCII file that contains the name
of the next available TIFF file name. File is transparent
to the user.
The following table contains the types of errors that might
occur during file transfer and the resulting system behavior.
System Response
The error is recorded in the confirmation
report and the job is terminated.
The error is recorded in the confirmation
report and the job is terminated.
The error is recorded in the confirmation
report and the job is terminated.
The error is recorded in the confirmation
report and the job is terminated.
The system waits a predetermined amount
of time and then re-tries to scan the job. If
the directory continues to be in use after
the time has expired, the error is recorded
in the confirmation report and the job is ter-
minated.
The error is recorded in the confirmation
report and the job is terminated. Files
placed on the file server up until that point
remain on the file server.
Page 7-13