Xerox Document Centre 220 User Manual page 243

Symptom
Streaks, lines, spots, or black, solid, or
dotted lines
Output is too light or too dark
Xerox Document Centre 220/230/332/340 User Guide
Recommendation
À
Clean the Document Glass, CVT
Glass, areas under the Platen Cover,
the Document Feeder and the paper
guides.
À
If the machine has been idle for an
extended period of time, or if the
Copy/Print Cartridge is new, begin the
job again.
À
Run the job from the Document Glass.
À
Reinstall the Copy/Print Cartridge.
À
Check the quality of the document.
Use Border Erase or Edge Erase to
remove lines and marks from the
edges of the document.
À
Load fresh paper.
À
Check the humidity in the machine
location. Refer to "Reference" on Page
11-1 for environmental specifications .
À
Load fresh paper.
À
Check the quality of the document.
À
Select Lighter or Darker on the touch
screen.
À
Run off more prints until the copy
quality has improved.
À
Replace the Copy/Print Cartridge.
Page 10-9