Xerox Document Centre 220 User Manual page 120

À
Touch the Added Features
tab.
À
Touch the Job Assembly tab.
À
Touch the Build Job button
and select On .
À
Program the job
requirements.
À
Load the first set of
documents in to the
document feeder or place the
document on the glass.
À
Press Start .
À
On completion of scanning
remove the originals.
À
From the Build Job screen
displayed program the next
set and press Start .
À
Repeat the steps above for
each set.
À
After the last set has been
scanned, touch End Build
Job to indicate that the job
has been completed. The
machine will complete the
quantity selected.
Page 3-56
NOTE: If more than a quantity of 1 has been selected the
machine, depending on the features programmed, will copy
1 set of each section. The remaining sets will be copied at
the end of the job.
Copy