And - ADEMCO Via 30+ Installation Instructions Manual

6127
REMOTE CONSOLE
6128
REMOTE CONSOLE
6137
REMOTE CONSOLE
6138 & 6139
REMOTE CONSOLES
4281L, 4281M, 4281H
RF RECEIVERS
(5700 System)
and
5881L, 5881M, 5881H
RF RECEIVERS
(5800 System)
5800TM
TRANSMITTER
MODULE
used with 5827BD
Wireless
Bidirectional Keypad
4219
WIRED EXPANSION
MODULE
4204
RELAY MODULE
4229
WIRED EXPANSION/
RELAY MODULE
ooh
& WD =
—_
=
. Physical:
. Electrical: Voltage Input: 12VDC,
. Interface Wiring: Same as 4127 above.
. Physical:
. Electrical: Voltage Input: 12VDC,
. Interface Wiring: Same as 4127 above.
. Physical: 6-1/4" W x 4-3/4" Hx 1" D
. Electrical: Voltage Input: 12VDC,
. Interface Wiring: Same as 4127 above.
. Physical: 7-3/8" (188mm)W
. Electrical: Voltage input: 12VDC
. Interface Wiring: Same as 4127 above.
. Range: 200ft (60m) nominal indoors from wireless transmitters (the actual
. Zones:
. Physical:
. Electrical: Voltage Input: 12VDC
. Interface Wiring: Same as 4127 above.
. Physical:
. Electrical: Voltage Input: 12VDC
. Interface Wiring: Same as 4127 above.
. 8 EOLR Loops (A-H): Loop A can be set for fast (10-15msec)
. Physical:
. Electrical: Voltage Input: 12VDC
. Physical:
2. Electrical: Voltage Input: 12VDC
Physical: 5-3/4" W x 4-3/4"Hx 1"D
Electrical: Voltage Input: 12VDC,
(146mm x 121mm x 26mm)
Current Drain: 20mA
. Interface Wiring: Same as 4127 above.
5-3/4" W x 4-3/4"Hx1"D (146mm x 121mm x 26mm)
Current Drain: 30mA
6-1/4" W x 4-3/4" Hx1"D = (159mm x 121mm x 26mm)
Current Drain: 85mA
(159mm x 121mm x 26mm)
Current Drain: 100mA
4-3/8" (112mm) H
10-7/8" (277mm) H <with antenna
1-7/16" (37mm) D
Current Drain: 35mA
range to be determined with system in TEST mode).
With the Ademco via30+:
4281L: accepts up to 4 transmitters
4281M /5881L: accepts up to 8 transmitters
5881M: accepts up to 16 transmitters
4281H/5881H: accepts up to 30 transmitters
2-1/4" W x 4-1/8" H x 7/8" D (57mm x 105mm x 22mm)
Current Drain: 20mA
6-1/2" W x 4-1/4" H x 1-1/4" D (169mm x 108mm x 32mm)
Current Drain: 35mA
response to an open.
6-1/2" W x 4-1/4" H x 1-1/4" D (169mm x 108mm x 32mm)
Current Drain: 15mA_ (Relays off)
180mA _ (Relays on)
. Interface Wiring: Same as 4127 above.
. Four Output Relays: SPDT Contacts,
2A max at 28VDC/AC
(120VAC for non-UL installations)
6-1/2" W x 4-1/4" H x 1-1/4" D (169mm x 108mm x 32mm)
Current Drain: 35mA (Relays off)
100mA (Relays on)
Rating:
. Interface Wiring: Same as 4127 above.
8 EOLR Loops (A-H): Loop A can be set for fast (10-15msec)
response to an open.
Two Output Relays: SPDT Contacts,
Rating: 2A max at 28VDC/AC
(120VAC for non-UL instatlations)
-40-