ADEMCO Via 30+ Installation Instructions Manual page 31

The Ademco Contact ID Reporting format comprises a 4 digit subscriber
number, 1 digit event qualifier ("new" or "restore"), 3 digit event code, 2 digit
"00", and 3 digit zone, contact ID, user, or system status number.
Ademco Contact ID Reporting takes the following format:
CCCC Q EEE GG ZZZ
where: CCCC = Customer (subscriber) ID
Qz= Event qualifier, where: E = new event , and R = restore
EEE= Event code (3 hexadecimal digits, defined in the table below)
GG= Always 00.
ZZZ= Zone/contact ID number reporting the alarm, or user number for
open/close reports. System status messages (AC Loss, Walk
Test, etc.) contain zeroes in the ZZZ location.
TABLE OF CONTACT ID EVENT CODES
Code|Definition —__ Definition
[110 [FireAlarm
[121 [Duress | 380 [Trouble (global)
| 122 |SilentPanic
| 383 |SensorTamper
| 131 | Perimeter Burglary SS «| 384 | RF Transmitter Low Battery
[132 |[InteriorBurglary
|_134 | Entry/Exit Burgla
| 135_|
| 408 |QuickAm
| 441 |ArmedSTAY
| 570 |Bypass
| 601 | Test- Manually Triggered
| 602 |PeriodicTest =
| 302 |LowSystemBattey —=s—s— "ssid
| 353 | LR Radio Trouble
Fire Loop Trouble
Day/Night Burgla
-31-