Zone Characteristicss - ADEMCO Via 30+ Installation Instructions Manual

Zone Characteristics
nat presen
Zones 5,6 Wired Programmable Zones. EOLR supervised,
For more information, | N.O. or N.C. sensors, 300-500 msec normal response.
see page 6.
Zones 7, 95, 96| Console Panics (Wired & Wireless). 24hr zones, pro-
For more information, | grammable for silent, audible, auxiliary, or fire.
see page 34.
Duress (see User's Manual).
Tamper. Reports faults in the relay module and
expansion units (e.g., 4204, 4219, 4229, 4281, 5881).
For all report formats (except Contact ID, which provides
more explicit reporting) a trouble code is reported when
the system is not armed, and Zone 9 report code is sent
for an alarm.
Up to 8 loops can be added, with a 4219 Wired
Expansion Module or No. 4229 Wired Expansion/Relay
Module. Loops are EOLR supervised, for N.O. or N.C.
sensors, 300-500 msec normal response, with optional
fast (10-15 msec) response on loop A (first expansion
zone). Zone numbers 10-17 should be assigned when
using a 4219 or 4229 for zone expansion.
Up to 30 wireless (RF) zones can be added by
using an Ademco 4281(5700 System) or 5881 (5800
System) Type RF Receiver. Specifically:
Additional
Wired
Programmable
Zones
For more information,
see page 7.
Wireless Zones
For more information,
see pages 8-10.
Model Number of Zones
4281L Up to 4
4281M/5881L Up to 8
5881M Up to 16
4281H/5881H Up to 30
Zone number assignments (which are also transmitter ID
assignments for 5700 RF system transmitters) can be in
the 10-63 range (18-63 when a 4219 or 4229 is also
used). A variety of RF system transmitters can be used to
make up the wireless zones. This includes window/door
units, smoke detectors, PIRs, and panic keys.
Note:For brevity, subsequent references herein to the
AF Receiver will be indicated by "4281/5881" un-
less a specific model is named.
If (4219/4229) wired expansion zones and (4281/5881) wireless
expansion zones are to be added, they can comprise up to 8
(4219/4229) wired zones, plus wireless zones up to the number permitted by
the type of 4281/5881 RF receiver used, as /ong as the total does not exceed
the 30 expansion zones accommodated by the control.
For example: When all 8 loops of a 4219 or 4229 are to be used, a 4281H or
5881H can add only 22 zones, so as not to exceed a total of 30
expansion zones for this control.